Bolt Length Selection Aid
Selecting the bolt length for any given grip and bolt diameter can be facilitated by using the chart entitled "Bolt Lengths for Various Grips" on page 6-167 in the Handbook [...]
Readily Available W-Shape Sections
In the current (11th) edition of the Handbook of Steel Construction, wide-flange (W‑shape) sections that are commonly used and readily available are highlighted in yellow colour, as shown on the [...]
High-Strength Bolts – Purchase Orders
Published in early 2015, ASTM F3125-15 (later as ASTM F3125/F3125M-15a) is a consolidation and replacement of six ASTM standards (A325, A325M, A490, A490M, F1852, and F2280). General information on bolt [...]
Steel Design Series – Welded Shapes
Part 4 of the CISC Steel Design Series (SDS-4), "Welded Shapes - Properties and Dimensions" has been published. Tables of Welded Wide-Flange (WWF) and Welded Reduced-Flange (WRF) shapes are reprinted [...]
Class 4 Compression Members in the Handbook
Part 4 in the Handbook of Steel Construction contains tables of factored axial compressive resistances. For a small number of compression members, the width-to-thickness ratio of the flanges and/or web [...]
CISC provides the Steel Knowledge BLOG as a part of its commitment to the education of those interested in the use of steel in construction. Neither CISC nor the authors assume responsibility for errors or oversights resulting from the use of the information contained herein. When a solution is suggested it may not necessarily apply to a particular structure or application, and is not intended to replace the expertise of a professional engineer, architect or other licensed professional.